| Customization: | Available |
|---|---|
| Type: | Magnetostrictive Displacement Sensor |
| Output Signal Type: | Can Bus Output |
|
Still deciding? Get samples of US$ 200/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Output: | CAN bus output |
| Measuring length: |
50~5500 mm,others can be customized according to needs
|
| Repeat accuracy: |
<± 0.001% of full scale, minimum ± 1 μm
|
| Non-linearity: | <± 0.01% of full scale, minimum ± 50 μm |
| Operating voltage Ub: |
+24Vdc power supply
(-20%~+20%): 4-wire system
+24/12Vdc power supply
(-20%~+20%): 2-wire system
|
| Ambient temperature: |
-40ºC ~ +105ºC
|
| Mechanical configuration: | Fastening M20 threads, Fastening M18 threads, Fastening 3/4" threads |
| Housing material: | 304 stainless steel (or 316L according to customer requirements) |
| IP rating: | IP68 |
| Approval/Conformity: | CE |
RS series sensors have strong protective shell, which is durable and can provide users with continuous, reliable and real-time displacement signals in harsh environment. The sensor is completely sealed with stainless steel shell, which fully meets the protection level IP68.
Note: The electronic compartment is not detachable. Because of the non-contact measurement technology, the sensor can be integrated in an isolated and sealed shell. The position magnet moves along the measuring rod, and the position can be measured without mechanical contact. For liquid level measurement, an alternative float can be used. The sensor with high protection level shell is easy to install and use, so as to better meet the application requirements. The measurement accuracy and all technical parameters depend on the output characteristics of the selected sensor, and the interface form can be selected: analog or SSI.
RS Series super protective Sensor, designed for cylinder built-in installation in harsh environment, withstands pressure of 35MPa for continuous, flexible and simple installation mode, and mounting thread form M18×1.5 or M20×1.5 or 3/4"-16UNF-3A.
){kind=link}