Product Parameters
Output: |
Analog output |
Measuring length: |
25-5500 |
Repeat accuracy: |
<+0.001% of full scale, min ±1μm |
Non-linearity: |
<+0.01% of full scale, min ±50 μm |
Operating voltage Ub: |
+24Vdc ± 20% |
Ambient temperature: |
-40°C ~+85°C |
Mechanical configuration: |
Fastening M20 threads, Fastening M18 threads, Fastening 3/4" threads |
Housing material: |
Aluminum alloy |
IP rating: |
IP67 |
Approval/Conformity: |
CE |
Product Description
The measurement accuracy of analog output magnetostrictive displacement sensor depends on the number of bits of built-in D/A module. Displacement signals can be directly output to external controllers, such as analog input of PLC.
The sensor transforms the absolute position of the vernier magnet into a standard analog signal in real time, that is, 0~20A (or reverse),
4~20mA (or reverse) DC current or 0~5V (or reverse),-5~+5V (or reverse), 0~10V (or reverse),-10~+10 (or reverse) DC voltage, etc. The
change trend of the output value is linear with the movement direction of the magnet ring, which can be set as forward and reverse output
according to needs.
Installation Instructions
RH series pressure-resistant rod shell, built-in installation design for hydraulic system, pressure-resistant 35MPa continuous, flexible and simple installation mode, mounting thread form M18×1.5 or M20×1.5 or 3/4"-16UNF-3A.
Note: The measurement non-usable area shown in the figure indicates that the output value of the sensor in this area is zero or unreliable. The default values of the first and last measurement non-usable areas of this product are 50.8mm and 63.5mm respectively. The value of the measurement non-usable area can be appropriately modified according to the needs of customers, please pointed out when ordering
Company Profile
![0-10V High Accuracy 0.001mm Magnetostrictive Position Linear Sensor for Displacement Measurement](//www.micstatic.com/athena/img/transparent.png)